How To Check TDS Level & Ideal TDS Level For Drinking Water

The quality of our drinking water has always been a cause of concern. According to a report, more than 600 million people in India are facing high to extreme levels of water stress, and 75% of the households do not have access to safe drinking water. The situation is similar with regard to sanitation and hygiene. Even after the treatment process, a lot of undesirable elements may be left in the treated water from our piped water system. 

This includes heavy metals, microbes, and dirty sediment. Dissolved calcium and magnesium help to keep arteries and joints healthy. These minerals are lost during the treatment process in modern cities. If you have been searching around for drinking water purification techniques to make your water safe, you might have come across the following terminologies: 

TDS is the overall dissolved solid content of water, including both organic and inorganic substances. Any water having a content of 2500 or higher can be considered as high TDS water. tester. Easy to use and easy to get rid of those common inorganic ions that cause a dull, metallic taste in your drinking water. Just put one 100mg Tds Value for Drinking Water test strip into one litre (1 quart) of water for 10-15 minutes and then compare it with the colour chart on the bottle of Tds Value strips.

Although pure water is colourless, odourless, and tasteless, any additives can alter its scent, colour, and taste. Thus, it is important to know the level of TDS in water. In many studies such as tea making, TDS level was defined as the measure of taste in water. The TDS metre is an electronic device that measures the total dissolved solids (TDS) in water, including minerals and salts. The presence of TDS in large amounts affects the taste and odour of water, making it difficult to use for drinking, cooking, or other domestic purposes. It also lets you know the total amount of impurities dissolved in water. As per Standards the acceptable limit of TDS for drinking water is 500 mg/L.

A TDS metre or gravimetric analysis gives a quantitative measure of the total amount of dissolved ions in the water, but it does not reveal what the dissolved substances are or their relationships. In essence, this means that a high TDS count of your water could be filled with essential minerals and toxic organic matter. TDS measures the solids in your water but does not indicate whether those solids are beneficial or hazardous.

Read More About: outdoor water filter

Have a look at the quality of water you are drinking with TDS Value. The TDS value expresses the total dissolved impurities present in your drinking water. The TDS metre can easily test whether the water is safe for consumption or not. The TDS metre will provide accurate and quick results and save you from any kind of infection-causing chemicals accidentally contained in your drinking water.

TDS value is a property of water and refers to the total dissolved solutes in it. The TDS values, therefore, reflect the level of contamination and pollution in water. Pure/conducted water has very low levels of TDS and as the TDS levels increase, the purity decreases. Having TDS purifiers at home will help you safeguard your health by providing you with pure drinking water. Over the years, many water purifiers using different filtration technologies are available on the market. When selecting a water purifier uv, there are various factors that should be considered including TDS removal efficiency, reliability as well as output of purified water. It is important to note that not every purifier is able to deliver high TDS removal and also make sure that the purified water is safe to drink. Here, you can go through some of the widely used purification technologies like RO and UV before making a decision.